Reboot restart the iPhone6 wizard

Have you ever met your iPhone 6 without a reaction? just like frozen. Before you sent it to repair by phone repair tools, you could try this short operation. If it still doesn't work, then you can find the professional person to fix it.

Simultaneously hold and press the home button and sleep/weak button at least ten seconds, then you will see APPLE LOGO, it means your iPhone has been reopened.

If the above measure have no effect, then you need professional to check your iPhone. More phone repair guide can consult vipprogrammer. Thank you.

Repair the no service error on iPhone 6

Why could be no service on your iPhone? Perhaps the signal around is not good or some parts of your phone got problem. Don't worry, just check it and fix it. In this process, you may need some phone repair tools to help you resolve the problem. I will show you in the next repair process.

•  Go to a space with strong signal and check whether the phone has service, if no, enter "*#06" on the phone dial key for IMEI code, but no response. In this case, we can initially determine the signal failure.
  

• IMEI cade displays right, SIM card readable, and Modem Firmware function normally in the phone settings. Then , put the phone on the multi-function heat insulated pad.
  

• Remove the motherboard by phone opening tools and then unload the shield plate on motherboard. Connect the motherboard to the PCB bracket.
  

•  Dismantle the baseband CPU by using hot air gun about 300 degrees centigrade in baseband CPU with BGA paste flux.
  

•  Clean the tins on the bonding pad and then using digital multimeter test the U1 Y1 pin of the baseband CPU, no resistance. We can make sure the pin has been disconnected.
  

•  Fix the pin with phone repair tools and re-install the motherboard to the phone, then test it, IMEI code functions back to normal.
  

This is the short guide about fixing the no service error on iPhone , it is need many kinds of phone repair tools , it's different to find them well, maybe be you can try Vipprogrammer, and you have any problem about phone repair can also consult it.

The related link:http://blog.rewatechnology.com/2017/03/how-to-fix-no-service-on-iphone-6/

How to escalate iphone 7 Plus 32GB storage to 128GB

Whether you still feel irritated for lack of phone storage? Anyway i am, so i have tried to expand my iPhone's memory to 128GB and now I've achieved it by a NAND Flash Programmer. I believe those who still want to upgrade their iPhone storage are want it too. Therefore, i share it with you.

User tips / warm reminder

1. This 2017 WL PCIE NAND Flash IC Programmer for iPhone 6s 6sP 7 7P 5SE / iPad pro.

2. It can repair Mainboard HDD Chip and NAND Flash error, modify the underlying data on NAND, Expand iPhone / ipad Memory Storage and so on.

3. It support mass write mode, save time.

4. Before using the software and operation, please install / update the latest iTunes software.

5. It needs professional to operate or maybe you can't use it.

6. There is a possible risk for the upgraded iPhone. If this technology was widely applied, Apple official may take some measures to stop this.

If you are ready, just follow the steps below

1. Turn on the switch button after you connect the WL PCIE NAND Flash Programmer with computer by using 2 data cable

2. Sign in the "WL Software", select the specific disk type "WL PCIE Disk".

3. Press to refresh the port and then “Open Port” to be prepared for data writing

4. Install the old Nand flash chip and press the reset button

5. Read and check whether the information queried is correct by clicking “All Data Query”.

6. Through software at a regular path to "back the original data".

7. Remove the old flash chip and install a new one.

8. Press the “Reset” button, then select the specific model iPhone 6s, click “write bottom”

9. Click “Write all disk data” and write iPhone 7P data to a brand new 128G flash drive with the PCIE NAND Flash Chip Programmer.

10. Cheak if the data write operation was successful by "all data query".

11. Connect the new flash drive with the motherboard.

12. Reassemble the phone and restore iPhone via iTunes then activate it.

13. Test and verify upgraded storage.

Just be careful in operation. If you have more problems, you can go in Vipprogrammer.

The related link:

http://blog.rewatechnology.com/2016/10/upgrade-iphone-6s-16gb-storage-to-128gb/

IPhone 7 demolition and reorganization guide

It is good for you to know how to disassemble and reorganize your iPhone 7, just in case. However, it is need many of phone repair tools to finish this engineering. Fortunately, now is the internet age, you can buy anything through the internet. Now we list the phone repair tools we need, they are phone opening tool, SIM card eject pin, tweezers, knife set and different types of the screwdriver. If you want to quickly find high-quality tools ,maybe you can try Vipprogrammer.

when you prepared all of phone repair tools you needed, then we can start.

1. Turn off your iPhone 7.

2. Pop up the Nano-SIM card tray.

3. Using screwdriver to unload two Pentalobe screws beside the lightning connector.

4. Carefully disassemble the cable and liberate the iPhone 7 display assembly from the phone.

5. Take out the stereo-enabling speaker and teardown the Front-Facing Camera Cable Assembly of iPhone 7.

6. Carefully extract the battery.

7. Pry the rear-facing camera out of the chassis and digging the iPhone 7 logic board out of the rear case.

8. Know down the iPhone 7 loudspeaker.

Finally, remove the last component which contains the power and volume button switches, LED flash, a microphone, and the ring / silent switch. When iPhone 7 power and volume buttons are nuzzled securely in the rear,  just defying conventional removal.

The related link:

https://www.fixez.com/guides/iphone/ iphone-7-repair-guides/iphone-7-teardown

Simple replacement procedure for iPhone battery strips

With the method as followimg, you can correctly replace Battery Adhesive Strips of any types iPhone. Everytime you remove the battery by iPhone opening tools, these strips must be replaced. It's very easy to injure the strips if you are not use correctly. Therefore,  when you first change this strips, you'd better have a backup. You can use your fingers to remove the strips or you can use the tweezers of phone repair tools.

The type of  iPhone "Plus" models use three strips not two, but the procedure is the same.

When you take out your battery , you can carry out the remover of the iPhone Battery Adhesive strips.

1. Remove the small plastic film covering the flat ends of the adhesive strips. Catch the large blue membrane backing instead and shell it back slightly to expose a small amount of adhesive near the flat end of the strips.

2. Put the battery upside down (battery connector on the right) ,carefully lever the exposed parts of the adhesive strips along the lower edge of the front of the battery, and press them lightly into place.

3. Peel off the large blue film covering the strips on the flat surface.

4. Softly roll the adhesive strips over the bottom edge of the battery toward the back by using your fingertip.

5. Lay the strips down flat and let them stick to the back of the battery.

6. In order to fully exposing the adhesive strips,you should peel away the remaining piece of film.

7. With the strips facing down, align the top edge of the battery into your iPhone.

Finally: When the battery is correctly positioned, lay it down in the iPhone and press it firmly into place, allowing the adhesive strips to stick to the rear case.And then ,you can put the battery back on your iPhone and make it re-work.

The related link:
https://www.ifixit.com/Guide/iPhone+Battery+Adhesive+Strips+Replacement/56465

The latest phone chip programmer JC pro1000 for batter tester data cable detection

JC pro1000 multi-functional Phone Programmer for iphone batter tester, detect iphone genuine data cable, iPhone logic EEPROM IC and Baseband EEPROM IC (CHIP) Erasing / Reading / Re-writing, iPhone NAND Flash (32bit / 64bit / PCIE NAND) underlying data Reading / Re-writing, iPhone fingerprint Reading / Re-writing.

---

JC pro1000 Programmer for batter tester, data cable detection

JC pro1000 programmer:  4.3-inch Touch display Screen, FreeRTOS operation system, Touch Control Home Button, suport turn on /off, return function, internal original brand battery, Support Chinese / English Language, Support Online / offline model, Support APP software update and function updated in future.

1pcs Main Unit + Optional function Test fixture,  with all activation APP software.

More details consult  Vipprogrammer.