It is good for you to know how to
disassemble and reorganize your iPhone 7, just in case. However, it is need
many of phone repair tools to finish this
engineering. Fortunately, now is the internet age, you can buy anything through
the internet. Now we list the phone repair tools we need, they are phone
opening tool, SIM card eject pin, tweezers, knife set and different types of
the screwdriver. If you want to quickly find high-quality tools ,maybe you can
try Vipprogrammer.
when you prepared all of phone repair tools
you needed, then we can start.
1. Turn off your iPhone 7.
2. Pop up the Nano-SIM card tray.
3. Using screwdriver
to unload two Pentalobe screws beside the lightning connector.
4. Carefully disassemble the cable and
liberate the iPhone 7 display assembly from the phone.
5. Take out the stereo-enabling speaker and
teardown the Front-Facing Camera Cable Assembly of iPhone 7.
6. Carefully extract the battery.
7. Pry the rear-facing camera out of the
chassis and digging the iPhone 7 logic board out of the rear case.
8. Know down the iPhone 7 loudspeaker.
Finally, remove the last component which
contains the power and volume button switches, LED flash, a microphone, and the
ring / silent switch. When iPhone 7 power and volume buttons are nuzzled securely
in the rear, just defying conventional
removal.
The related link:
https://www.fixez.com/guides/iphone/ iphone-7-repair-guides/iphone-7-teardown
No comments:
Post a Comment