Help! My iPhone 6s reboots randomly, why it that? A customer reported that. Now, we are going to check it and fix it by professional phone repair tools!
Disassemble the iPhone with phone opening tools, carefully remove the iPhone motherboard. And then check it under the microscope, we found that the barometer of the mobile phone was soldered with 4
or 5 jumper wires, this iPhone has been repaired before.
Open the WUXINJI Dongle to check iPhone schematic diagram and bitmap, we found it is a zero ohm resistor.
After
the short connection and installation, the iPhone 6s is tested OK. In order to
ensure that the customer will not get any problems when he receives the
handset, it will not be a problem if he wait for a night, until the second day
morning, we found sometimes it still reboot repeatedly.
Is
there a small hole in the barometer that causes a partial damage to the
barometer? A barometer is directly found on the dismounted iPhone 6s motherboard, apply high temperature glue
on the small hole and blown down the barometer with QUICK 861DW rework station . After the barometer replacement, the iPhone has no
reboot failure after waiting for 2 days.
TIPS:
No comments:
Post a Comment