Monday, December 4, 2017

Simple ways to fix iPhone 6S cannot turn on after dropping



An iPhone 6S dropped and then it doesn't boot. Disassemble the iPhone with phone opening tools, and then put it connects to DC power supply, it shows big short circuit. After measure it, we found the PP_VCC_MAIN is short circuit. Many of dropped iPhones PP_VCC_MAIN filter capacitor will be short circuit.


Remove the iPhone motherboard, and observe it under the microscope, we found the capacitance C5283_RF next to iPhone WI-FI chip turned gray, it differs greatly from the color of the capacitor next to it. This capacitance is the filter capacitor of PP_VCC_MAIN.


Now we directly remove this capacitor, and measure it again with multimeter, the resistance value is back to normal. As shown in picture 2.



Connect it to DCpower supply again, and boot it, now it shows normal, the iPhone 6s can be turned on. The repairs end!


No comments:

Post a Comment

2021 IBOX2 PCIE NAND DFU Purple Screen Programmer For iPhone/iPad Repair

This is an article about the introduction of ibox2 programmer features, the main functions of the ibox2 programmer are PCIE Nand flash prog...